After making the investment that requires a coat, the best thing to do to get the most out of it is to give it the necessary maintenance and care. Depending on the type of material, cleaning will be different in each case, so it is essential to make sure that the products that are applied are indeed adequate. To know how to clean a sheepskin coat, we give you a guide that will help you leave it impeccable.
How to clean a sheepskin coat?
The first thing to do to lengthen the cleanliness of a sheepskin coat is to keep dirt at bay. This includes being careful with the spaces in which we put our coat and protecting the material with specialized products. There are various brands of waterproof solutions on the market that are applied to the garment and serve to repel liquids that may fall on it. Although very effective, these types of solutions should not be applied regularly because they can have the opposite effect, damaging the tissue or discoloring it.
To clean a fur coat you must also have a special brush to clean it. Although the most common is to use a toothbrush to remove small stains, the reality is that this is not the most appropriate instrument to do it.
Ideally, have a soft bristle brush on one side and metal bristles on the other. This brush is used for frequent maintenance of the coat with the soft part, especially during the season of greatest use and the correct way to use this side is brushing in the direction of the coat’s hair.
To remove dirt (dust, dry mud, etc.) the metal part of the brush is used, in the opposite direction to the hairs, with short and light strokes and with great care so as not to damage the fur of the coat.
Another specialized product to clean this type of coat is rubber. They are very similar to erasers and in fact are used in the same way, except that they are special for cleaning skin. Its use is a little less aggressive than the brush, but in the same way, you should avoid rubbing the garment excessively to avoid damaging it, as well as not abusing the use of rubber.
Many people often use eraser to clean their fur coat, but obviously it is not as effective as it is not a specialized product. It is better to make the investment to extend the life of the garment for as long as possible.
There are also special soapy solutions for turned skin. Some of them generate a foam that must be removed with a damp cloth and then allow the coat to dry normally. In any case, the solution should not be applied with pressure, but by rubbing lightly and with the help of a sponge.
When the coat is slightly stained or soiled and urgent cleaning is required, the best thing to do is to take a piece of cloth moisten with water and run it over the stain toward the coat’s fur. If more time is available, the ideal is to moisten a piece of cloth with vinegar, wait for it to dry and then use the special brush for skin turned in the direction of hair growth.
If the stain is oily, cleaning the back fur coat will require more complex measures: you can take one part of ammonia diluted in two of water, soak a soft bristle brush and run it through the stain without rubbing or pressing too hard. , to finally dry the coat away from sunlight. If the stain is fresh, talcum powder or coarse salt can be applied to absorb the grease.
An extreme but effective measure to clean these coats is to use a piece of sandpaper. But the stain must be small and the cleaning process must be quick and very careful, as it can end up damaging the tissue. It is only recommended to use this method if the stain is not removed in any other way. When finished, the soft bristle brush can be passed to restore the area that has been sanded.
You may like also to read https://netcrunch.co.uk/